This is a brand new BILLET CAMSHAFT! NOT A “WELDED UP’ CAM. It is a very high quality racing camshaft, made in Australia. Hundreds of these camshafts were sold over the last 35 years and raced with considerable success and 100% reliable.
“Bolt in” for most applications (check our fitting instructions for more details), BUT as there are many “different pistons”, please double-check piston-to-valve clearance (as any good mechanic would do). full specifications sheet is supplied with the camshaft, including suggestions on assembly.
This “Racing” cam is quite suitable for non-race applications as the mid range power is still very good. The cam can be used with “good condition” standard valve springs, but we recommend a “race spring kit” for sustained high RPM, as in racing use.
NOTE: This cam will not suit early XR75K1/K2/K3 (4 Speed), or early 1970’s SL/XL100’S’ (but DOES suit XL100’S’ (1978 onwards).You must use rocker arms IN EXCELLENT CONDITION.
Timing @ 0.040″ (1.00mm)
Intake opens: 16 degrees Closes: 52 degrees Lift: 0.322″
Exhaust opens: 61 degrees Closes: 15 degrees Lift: 0.288″
Inspection prior to purchase is welcome, and pick-up is available
We are located in West Heidelberg, Vic. 3081 Tel: 039 459-1158
Also check our 100% feedback in our ebay store http://stores.ebay.com.au/Bargain-Bike-Bits-and-Accessories
|Dimensions||20 × 10 × 10 cm|